EOS 60D Firmware Update Version 1.0.8
Changes
Firmware version 1.0.8 incorporates the following fix.
- Fixes a phenomenon in which captured images may become overexposed when using the camera's built-in flash or an external Speedlite in combination with the lenses listed below:*
a) EF300/4 L IS USM b) EF28-135/3.5-5.6 IS USM c) EF75-300/4-5.6 IS USM d) EF100-400/4.5-5.6 L IS USM
Firmware version 1.0.8 is for cameras with Firmware Version 1.0.5. If the camera's firmware is already Version 1.0.8, it is not necessary to update the firmware.
Before downloading the firmware update, please be sure to read the entire contents of this page.
Precautions
A power failure during the firmware writing operation may disable the camera.
- Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional) ACK-E6 for the firmware update.
- Do not shut off the power during the firmware writing operation.
- Do not open the SD card slot cover during the firmware writing operation.
Do not press any camera buttons during the firmware writing operation.
Firmware Q&A
What are some changes of Firmware Version 1.0.8?
The following fix have been incorporated.
- Fixes a phenomenon in which captured images may become overexposed when using the camera's built-in flash or an external Speedlite in combination with the lenses listed below:*
a) EF300/4 L IS USM b) EF28-135/3.5-5.6 IS USM c) EF75-300/4-5.6 IS USM d) EF100-400/4.5-5.6 L IS USM
How do I check the camera's current firmware version number?
| Turn the Power Switch |  |
How do I update the firmware?
These are two ways to update the camera's firmware.
- Download the firmware file from this web site and install the update as shown in the updating procedure.
- Bring the camera to a Canon Customer Support Center and have the firmware updated by the center.
If you choose this method, contact a Canon Customer Support Center in your region.
Do I need any special equipment to update the firmware?
The equipment required is as follows.
- Battery Pack LP-E6 (The battery pack must be fully charged.) or AC Adapter Kit ACK-E6 (Optional)
- SD card (64MB or more, 64GB or less)
How do I copy the downloaded firmware file to the SD card?
Two methods of copying the downloaded firmware file are provided.
- If you have an SD card reader, please copy the firmware file to the SD card via the SD card reader.
- Connect the camera to a personal computer with a USB cable and copy the firmware file to the SD card in the camera. Please use the EOS Utility application bundled with the camera to copy the file.
I do not have the equipment necessary for the firmware update.
Please contact a Canon Customer Support Center in your region.
Preparation for firmware update
The firmware update procedure is available in the PDF file at the end of this page. Please download the PDF file and read the procedure carefully before updating the firmware.
Firmware update procedures
In the following instructions, X.X.X or xxx indicates either the current firmware version or the firmware version for the update.
(1) Format the SD Card
Be sure to carefully review the contents of the SD card before formatting.
>
>
- Insert the SD card into the camera and turn the Power Switch
. - Press the
- Press the Multi-controller to select the [Format] item, and press the
button. - Press the Multi-controller to select [OK], and press the
button. - Turn the camera
and remove the SD card from the camera.
(2) Download the firmware update file from this page
Please download the compressed, self-extracting file that matches your computer's operating system and create the following firmware update file.
- Extracted Firmware Update File
- File name : 60d00108.fir
- File size : 11,601,948 bytes
How to Extract the Firmware Update File
Windows
Double-click the downloaded file.
Clicking [OK] will cause the file's contents to be extracted and the firmware update file to be created.
Macintosh
The downloaded file will automatically self-extract,creating the firmware update file.
In case the downloaded file does not automatically self-extract, double-click the downloaded file.
In case the downloaded file does not automatically self-extract, double-click the downloaded file.
How to Confirm the File Size
Windows
Right-click the icon of the firmware update file and select the [Properties] command from the pop-up menu that appears.
Macintosh
Select the icon of the firmware update file, and then select the [Get Info] command from the [File] menu.
There are two ways to install the firmware update:
- To install from the SD card, follow the procedures outlined in Step (3-1), then bypass Step (4-1) and continue to Step (5).
- To install directly from a compatible computer, bypass Step (3-1) and follow the procedures from Step (4-1) onward.
(3-1) Copy the firmware update file to the SD card.
Insert the SD card that has been formatted in the Camera into the SD card reader.
Copy the firmware update file to the first window that appears when the SD card is opened (the root directory).
Remove the SD card from the card reader.
Copy the firmware update file to the first window that appears when the SD card is opened (the root directory).
Remove the SD card from the card reader.
* When removing the SD card, be sure to do so as described in the documentation for the computer or the card reader.
* If the firmware update file is placed in a subfolder of the SD card, the camera will not see it.
* If the firmware update file is placed in a subfolder of the SD card, the camera will not see it.
(3-2) Start the firmware update.
Rotate the Mode Dial to select
mode (or one of the other modes in the creative zone). |
Insert the SD card with the firmware into the camera.
Turn the Power Switch , and then press the button to display the menu.
| Press the Multi-controller to select the "Firmware Ver.x.x.x" item at the bottom of the "Set-up 3 (Yellow)", and then press the |
 | The firmware update screen will appear. Press the Multi-controller to select [OK], and then press the *If the firmware update screen does not appear on LCD monitor, the firmware update file may not have been properly copied to the SD card, so please try again starting from Step (1). |
(4-1) Connect the camera and the computer.
Rotate the Mode Dial to select
mode (or one of the other modes in the creative zone).Insert an SD card that has been formatted in the camera into the camera.
Connect the camera and the computer with the USB cable, and then set the camera's power switch to
(4-2) Start the firmware update.
Start EOS Utility.
 | Click the [Camera settings / Remote shooting] button. Click [  ], and then click the [Firmware Ver. X.X.X]. |
 | The firmware update will appear on the computer screen. Click the [OK] button. |
The firmware update file will be copied to the SD card by following the on-screen instructions to select it.
 | Click the [Camera settings / Remote shooting] button. Click the [OK] button. |
 | The firmware update will appear on the computer screen. Click the [OK] button. |
Follow the procedure from Step (5) onward on the camera.
(5) Update the firmware.
 | The screen shown on the left will appear on the camera's LCD monitor. |
 | If you press the |
 | The message on the left will appear during the update. |
(6) Complete the firmware update.
 | When the update is completed, the message on the left will appear on the LCD monitor. Complete the firmware update by pressing the |
The firmware update is now completed.
When the firmware update operations are finished, turn the camera and remove the battery from the camera for at least two seconds. This will cause the new firmware to take effect after the battery has been reloaded and the camera is turned on.
Format the SD card before using it again.
If an ERROR message appears during the firmware update
 | If this screen appears, remove the battery and check to make sure that there are no problems with the battery capacity or with the firmware update file on the SD card. If there are no problems,repeat the update operations again. |
If you still have a problem, please contact the Canon Customer Support Center in your region.
End User License Agreement
IMPORTANT!
IMPORTANT- READ THIS AGREEMENT CAREFULLY BEFORE CLICKING "I Agree" AT THE BOTTOM OF THIS PAGE!
This License Agreement (the "Agreement") is a legal agreement between you and Canon Inc. ("Canon") under which Canon is providing the software program for updating the firmware of Canon’s digital camera products "EOS 60D (the "Software"). BY CLICKING "I Agree" AT THE BOTTOM OF THIS PAGE, YOU ARE DEEMED TO AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT DOWNLOAD THE SOFTWARE. IN SUCH EVENT, YOU WILL NOT BE ABLE TO USE THE SOFTWARE
1. GRANT OF LICENSE:
Canon grants you a personal and non-exclusive license to install the Software directly or through other medium such as a Secure Digital (SD) memory card and use it on Canon’s digital camera product "EOS 60D" which you own.
You shall not assign, sublicense, sell, rent, lease, loan, convey or otherwise transfer to any third party, or copy, duplicate, translate or convert to another programming language the Software, except as expressly provided herein.You shall not alter, modify, disassemble, decompile or otherwise reverse engineer the Software and you also shall not have any third party do so.You shall not modify, remove or delete a copyright notice of Canon contained in the Software.
Except as expressly provided herein, no license or right, express or implied,is hereby conveyed or granted by Canon to you for any intellectual property of Canon.
2. OWNERSHIP AND COPYRIGHT:
The Software is copyrighted and owned by Canon.You agree and acknowledge that Canon transfers neither ownership interest nor intellectual property in the Software to you under this Agreement or otherwise, and that Canon retains all right, title and interest to the Software.
3. EXPORT RESTRICTIONS:
You agree to comply with all applicable export control laws and regulations of the country involved, and not to export or re-export, directly or indirectly, the Software in violation of any such laws and regulations.
4. SUPPORT AND UPDATE:
Canon, Canon’s subsidiaries and affiliates,their distributors and dealers are not responsible for maintaining or helping you in your use of the Software. No updates, bug-fixes or support will be made available to you for the Software.
5. DISCLAIMER:
THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU (AND NOT CANON, CANON’S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS AND DEALERS) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU IN SUCH STATES WHICH DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES.
Canon, Canon’s subsidiaries and affiliates, their distributors and dealers do not warrant that the functions contained in the Software will meet your requirements or that the operation of the Software will be uninterrupted or error free.
IN NO EVENT SHALL CANON, CANON’S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS AND DEALERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, LOSS OF BUSINESS PROFITS, LOSS OF BUSINESS INFORMATION,LOSS OF BUSINESS INTERRUPTION OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES)ARISING OUT OF THE SOFTWARE, USE THEREOF OR INABILITY OF USE THEREOF EVEN IF CANON, CANON’S SUBSIDIARIES OR AFFILIATES, THEIR DISTRIBUTORS OR DEALERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU IN SUCH STATES WHICH DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.
CANON, CANON’S SUBSIDIARIES AND AFFILIATES, THEIR DISTRIBUTORS AND DEALERS SHALL HAVE NO OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY.
6. TERM:
This Agreement is effective upon your clicking "I Agree" at the bottom of this page. You may terminate this Agreement by deleting the Software. This Agreement will also terminate if you fail to comply with any of the terms of this Agreement. In addition to Canon enforcing any of its legal rights, you shall then promptly delete the Software.
7. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE:
The Software is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.72024 (June 1995), all U.S. Government End Users shall acquire the Software with only those rights set forth herein. Manufacturer is Canon Inc./30-2,Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan.
8. SEVERABILITY:
In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction,such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect.
9. ACKNOWLEDGMENT:
BY CLICKING "I Agree" AT THE BOTTOM OF THIS PAGE, YOU SHALL BE DEEMED TO HAVE ACKNOWLEDGED THAT YOU HAVE READ THIS AGREEMENT,UNDERSTOOD IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS. YOU FURTHER AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF WHICH SUPERSEDES ANY PROPOSALS OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT. NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED REPRESENTATIVE OF CANON
Tidak ada komentar:
Posting Komentar